|
|
|
|
Dynalco Products - Speed Sensors速度傳感器
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性傳感器/速度傳感器
美國戴納科公司DYNALCO提供可變磁阻傳感器選擇，包括測量為速度和方向感測以及流量、功率、計數、定時和同步。并且獲得第三方認證CSA,UL,ATEX等。We offer the largest selection of variable reluctance sensors for speed and direction sensing as well as flow, power, counting, timing and synchronization. Third-party approvals available.
美國德納科Dynalco公司控制儀表公司簡介
美國德納科Dynalco公司設計和制造高度工程堅固，可靠的，第三方的監測，控制和往復式發動機，蒸汽渦輪機，燃氣渦輪機，泵和輸送系統的保護認證儀表。我們?yōu)橐粋�在石油和天然氣，化工/過程，建筑業及越野設備，交通運輸，發電，船舶，采礦，水和廢水市場的客戶和工廠自動化等。Dynalco sensors have many uses including speed, direction sensing, flow and power measurement, counting, timing, and synchronization. Our sensors come in a wide variety of lengths, body and pole piece diameters, and output levels. Styles include self-powered magnetic, miniature, dc-powered, and Hall effect. Dynalco also engineers sensors for custom applications.
Standard Magnetic Pickups
標準磁性傳感器
標準磁性傳感器用于大多數應用。這些傳感器有兩個插腳，可接受標準MS樣式的連接器。它們有短、中、長和超長螺紋長度。靈敏度可以是標準的、高的或超高的。有時需要具有更高靈敏度的拾波器以在低速下產生更高的輸出。Standard magnetic pickups are used for most applications. These pickups have 2 pins that will accept a standard MS style connector. They are available in short, medium, long and extra-long thread lengths. The sensitivity is available as either standard, high or ultra-high. A pickup with higher sensitivity is sometimes required to produce higher output at low speed
| MODEL 型號 |
Thread size 螺紋尺寸 |
Sensitivity 靈敏度 |
|
5/8-18 X 1.125 |
Standard |
|
5/8-18 X 1.125 |
High |
|
5/8-18 X 1.125 |
Ultra-high |
|
|
|
|
5/8-18 X 2.500 |
Standard |
|
5/8-18 X 2.500 |
High |
|
5/8-18 X 2.500 |
Ultra-high |
|
|
|
|
5/8-18 X 4.000 |
Standard |
|
5/8-18 X 4.000 |
High |
|
5/8-18 X 4.000 |
Ultra-high |
|
|
|
|
5/8-18 X 6.000 |
Standard |
|
5/8-18 X 6.000 |
High |
Intrinsically-safe Magnetic Pickups
本安型磁性傳感器
本安全型磁性傳感器的輸出電流有限，用于可能存在爆炸性氣體的危險場所。這些皮卡將由CSA、UL或ATEX批準，閱讀適用證書非常重要，證書中應說明批準地點、批準的產品以及安裝說明。與標準拾音器類似，這些拾音器有兩個插腳，可接受標準MS樣式的連接器，并提供短和長螺紋長度。靈敏度可以是標準的，也可以是高的。有時需要具有更高靈敏度的拾波器以在低速下產生更高的輸出。Intrinsically-safe magnetic pickups have a limited output current for use in hazardous locations where explosive gases may be present. These pickups will be approved by either CSA, UL or ATEX and it is important to read the applicable certificate that will have a description on where they are approved, which products they are approved with, as well as installation instructions. Similar to the standard pickups, these pickups have 2 pins that will accept a standard MS style connector and are available in short and long thread lengths. The sensitivity is available as either standard or high. A pickup with higher sensitivity is sometimes required to produce higher output at low speed.
| MODEL 型號 |
Thread size 螺紋尺寸 |
Sensitivity 靈敏度 |
|
5/8-18 X 1.125 |
Standard |
|
5/8-18 X 1.125 |
High |
|
|
|
|
5/8-18 X 4.000 |
Standard |
|
5/8-18 X 4.000 |
High |
Explosion-proof Magnetic Pickups
防爆磁性傳感器
防爆磁性傳感器采用帶“NPT內螺紋”的盲端外殼建造，用于連接到NGID或柔性導管，包括電纜導管內的所有電線和連接，這種結構允許在可能存在爆炸性氣體的危險位置使用。這些皮卡將由CSA、UL或ATEX批準，閱讀適用證書非常重要，證書中應說明批準地點、批準的產品以及安裝說明。這些皮卡有2-AWG 18導線，可以定制長度訂購。螺紋體有短螺紋和長螺紋兩種。Explosion-proof magnetic pickups are constructed using a blind-end housing with a "NPT female thread for connection to either ngid or flexible conduit By containing all wires and connections within the cable conduit,this construction allows for use in hazardous locations where explosive gases may be present. These pickups will be approved by either CSA, UL or ATEX and it is important to read the applicable certificate that will have a description on where they are approved, which products they are approved with, as well as installation instructions. These pickups have 2-AWG 18 leads that can be ordered in custom lengths. The bodies are available in short and long thread lengths
| MODEL 型號 |
Thread size 螺紋尺寸 |
Approval認證 |
| M104 |
4-20 X 1.875 |
CSA / UL |
| M140 |
4-20 X 1.875 |
UL |
| M180 |
5/8-18 X 1.500 |
CSA / UL / ATEX |
| M219 |
5/8-18 X 3.500 |
CSA |
| M318 |
3/4-20 X 3.500 |
CSA |
| M319 |
5/8-18 x 3.500 |
CSA/ATEX |
Hall-effect Sensors
霍爾效應傳感器
霍爾效應傳感器需要直流電源，工作速度低于0轉/分。這些傳感器有3個插腳，可接受標準的3插座MS型連接器。有兩種型號。M806型號設計用于感應目標磁鐵的北極或南極。該傳感器是點火系統，需要從凸輪軸脈沖正確的點火正時。M951型設計用于檢測黑色金屬；齒輪齒、單個鐵銷或孔/鍵槽。任何一個傳感器的輸出都是一個數字方波，使其成為輸入到PLC脈沖卡的選擇。Hall-effect sensors require DC power and operate at speeds down to 0 RPM. These sensors have 3 pins that will accept a standard 3-socket MS style connector. There are two models available. The model M806 is designed to sense either the north or south pole of a target magnet. This sensor is ideal for ignition systems that require a pulse from the camshaft for proper ignition timing. The model M951 is designed to sense ferrous metal; either gear teeth, a single iron pin or hole/keyway. The output of either sensor is a digital square wave making them ideal for input to a PLC pulse card.
| MODEL 型號 |
Thread size 螺紋尺寸 |
Supply input |
|
5/8-18 X 4.500 |
8-32VDC |
|
5/8-18 X 4.500 |
8-32VDC |
- DYNALCO Magnetic Pickups/Speed Sensors 磁性傳感器/速度傳感器
- Dynalco Products - Speed Sensors速度傳感器
M104 Magnetic Pickup/Speed Sensor
M131 Magnetic Pickup/Speed Sensor
M319 Magnetic Pickup/Speed Sensor
M204 Magnetic Pickup/Speed Sensor
M180 Magnetic Pickup/Speed Sensor
M343 Bi-Directional Magnetic Pickup
M101 Magnetic Pickup/Speed Sensor
M233 Magnetic Pickup/Speed Sensor
C101-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
M133 Magnetic Pickup/Speed Sensor
M137 Magnetic Pickup/Speed Sensor
M134 Magnetic Pickup/Speed Sensor
M138 Magnetic Pickup/Speed Sensor
M135 Magnetic Pickup/Speed Sensor
M139 Magnetic Pickup/Speed Sensor
M202 Magnetic Pickup/Speed Sensor
M334 Magnetic Pickup/Speed Sensor
M107 Magnetic Pickup/Speed Sensor
- DYNALCO Magnetic Pickups/Speed Sensors
Product |
Description |
 |
M101 |
MAGNETIC PICKUP: standard sensitivity and reach |
| |
M102 |
MAGNETIC PICKUP: high sensitivity, standard reach |
| |
M131 |
MAGNETIC PICKUP: standard sensitivity, long reach |
| |
M133 |
MAGNETIC PICKUP: high sensitivity, long reach |
| |
M142 |
MAGNETIC PICKUP: ultra-high sensitivity, standard reach |
| |
M151 |
MAGNETIC PICKUP: standard sensitivity, medium reach |
| |
M155 |
MAGNETIC PICKUP: turbine flow meter, low drag |
| |
M168 |
MAGNETIC PICKUP: high sensitivity, standard reach |
| |
M183 |
MAGNETIC PICKUP: high sensitivity, medium reach |
| |
M184 |
MAGNETIC PICKUP: ultra-high sensitivity, medium reach |
| |
M185 |
MAGNETIC PICKUP: ultra-high sensitivity, long reach |
| |
M189 |
MAGNETIC PICKUP: standard sensitivity, medium reach |
| |
M343 |
MAGNETIC PICKUP: bi-directional sensor for DST-2000C |
| |
M104 |
MAGNETIC PICKUP: explosion-proof housing, UL/CSA approved |
| |
M134 |
MAGNETIC PICKUP: intrinsically safe, standard reach |
| |
M135 |
MAGNETIC PICKUP: intrinsically safe, long reach |
| |
M139 |
MAGNETIC PICKUP: intrinsically safe, medium reach |
| |
M140 |
MAGNETIC PICKUP: explosion-proof housing |
| |
M180 |
MAGNETIC PICKUP: explosion-proof housing, ATEX/CSA approved |
| |
M201 |
MAGNETIC PICKUP: intrinsically safe, standard reach |
| |
M202 |
MAGNETIC PICKUP: intrinsically safe, standard reach |
| |
M203 |
MAGNETIC PICKUP: intrinsically safe, power zener, long reach |
| |
M204 |
MAGNETIC PICKUP: intrinsically safe, power zener, medium reach |
| |
M205 |
MAGNETIC PICKUP: intrinsically safe, power zener, long reach |
| |
M231 |
MAGNETIC PICKUP: intrinsically safe, long reach |
| |
M233 |
MAGNETIC PICKUP: intrinsically safe, long reach |
| |
M318 |
MAGNETIC PICKUP: explosion-proof housing, CSA approved |
| |
M319 |
MAGNETIC PICKUP: explosion-proof housing, ATEX/CSA approved |
| |
M107 |
MAGNETIC PICKUP: power source, standard sensitivity, standard reach |
| |
M163 |
MAGNETIC PICKUP: power source, blind end |
| |
M207 |
MAGNETIC PICKUP: power source, low impedance |
| |
M208 |
MAGNETIC PICKUP: power source, long reach |
| |
M137 |
MAGNETIC PICKUP: miniature housing, standard sensitivity |
| |
M138 |
MAGNETIC PICKUP: miniature housing, high sensitivity |
| |
M143 |
MAGNETIC PICKUP: miniature housing, 14 inch leads |
| |
C101-10 |
PICKUP CABLE ASSEMBLIES: for passive, magnetic pickups, 2-pin, 10 feet (3.048 m), minimum. |
| |
C910-10 |
PICKUP CABLE ASSEMBLIES: for active magnetic pickups, 3-pin, 10 feet (3.048 m), minimum. |
| |
C917-10 |
PICKUP CABLE ASSEMBLIES: for active magnetic pickups, 6-pin, 10 feet (3.048 M), mimimum. |
| |
HTM-801 |
TARGET MAGNET ASSEMBLY: target magnet assemblies for Hall effect pickups |
- DYNALCO Magnetic Pickups/Speed Sensors
C101-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
Cable/connector assembly for 2-pin magnetic pickups, shielded, straight clamp, MS 3106A-10SL-4S c..
C910-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
C910-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
Cable/connector assembly for 3-pin active magnetic pickups, shielded, straight clamp, MS 3106A-10..
C917-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
C917-10 Magnetic Pickup/Speed Sensor Cable/Connector Assembly
Cable/connector assembly for M343 bi-directional magnetic pickup, shielded, 6-pin, 10 feet ..
M101 Magnetic Pickup/Speed Sensor
M101 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has standard sensitivity which makes it best suited for high speed ..
M102 Magnetic Pickup/Speed Sensor
M102 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has high sensitivity which makes it good for mid-speed (300 to 50..
M104 Magnetic Pickup/Speed Sensor
M104 Magnetic Pickup/Speed Sensor
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environmen..
M107 Magnetic Pickup/Speed Sensor
M107 Magnetic Pickup/Speed Sensor
This standard magnetic pickup can power other instruments. It has standard sensitivity, standard ..
M131 Magnetic Pickup/Speed Sensor
M131 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has standard sensitivity long reach (4.000inches) and a 5/8-18 thre..
M133 Magnetic Pickup/Speed Sensor
M133 Magnetic Pickup/Speed Sensor
This highly sensitivity magnetic pickup is well suited for lower speed (300 to 500 rpm) applicati..
M134 Magnetic Pickup/Speed Sensor
M134 Magnetic Pickup/Speed Sensor
This intrinsically-safe, low-output magnetic pickup has a standard reach (1.125 inches), 5/8-18 t..
M135 Magnetic Pickup/Speed Sensor
M135 Magnetic Pickup/Speed Sensor
This intrinsically safe magnetic pickup has a long reach(4.000 inches), 5/8-18 thread, and is CSA ap..
M137 Magnetic Pickup/Speed Sensor
M137 Magnetic Pickup/Speed Sensor
This miniature magnetic pickup has standard sensitivity which is appropriate for higher speed (&g..
M138 Magnetic Pickup/Speed Sensor
M138 Magnetic Pickup/Speed Sensor
This miniature magnetic pickup is highly sensitive which makes it appropriate for lower speed (30..
M139 Magnetic Pickup/Speed Sensor
M139 Magnetic Pickup/Speed Sensor
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a medium..
M140 Magnetic Pickup/Speed Sensor
M140 Magnetic Pickup/Speed Sensor
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environmen..
M142 Magnetic Pickup/Speed Sensor
M142 Magnetic Pickup/Speed Sensor
This standard magnetic pickup is ultra-sensitive making it appropriate for low speed (less than 3..
M143 Magnetic Pickup/Speed Sensor
M143 Magnetic Pickup/Speed Sensor
This magnetic pickup has a micro-miniature housing and 14 inch leads. Its housing length is a sho..
M151 Magnetic Pickup/Speed Sensor
M151 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has standard sensitivity which makes it appropriate for higher spee..
M155 Magnetic Pickup/Speed Sensor
M155 Magnetic Pickup/Speed Sensor
This special magnetic pickup is a low drag, flow meter sensor with thread x thread length x housi..
M168 Magnetic Pickup/Speed Sensor
M168 Magnetic Pickup/Speed Sensor
This highly sensitive magnetic pickup is perfect for lower speed (300 to 500 rpm), larger gear (&..
M180 Magnetic Pickup/Speed Sensor
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environmen..
M183 Magnetic Pickup/Speed Sensor
M183 Magnetic Pickup/Speed Sensor
This highly sensitive magnetic pickup makes it good for mid-speed (300 to 500 rpm), larger gear (..
M184 Magnetic Pickup/Speed Sensor
M184 Magnetic Pickup/Speed Sensor
This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 i..
M185 Magnetic Pickup/Speed Sensor
M185 Magnetic Pickup/Speed Sensor
This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 i..
M189 Magnetic Pickup/Speed Sensor
M189 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has standard sensitivity which makes it appropriate for high speed ..
M201 Magnetic Pickup/Speed Sensor
M201 Magnetic Pickup/Speed Sensor
The low output of this standard magnetic pickup makes it intrinsically safe and CSA approved for ..
M202 Magnetic Pickup/Speed Sensor
M202 Magnetic Pickup/Speed Sensor
The low output of this magnetic pickup makes it intrinsically safe and CSA approved for use in ha..
M203 Magnetic Pickup/Speed Sensor
M203 Magnetic Pickup/Speed Sensor
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It..
M204 Magnetic Pickup/Speed Sensor
M204 Magnetic Pickup/Speed Sensor
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It..
M205 Magnetic Pickup/Speed Sensor
M205 Magnetic Pickup/Speed Sensor
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It..
M207 Magnetic Pickup/Speed Sensor
ISB-101 Magnetic Pickup/Speed Sensor
INTRINSIC SAFETY BARRIER: Energy limiting device for magnetic pickups, CSA Class I, Division 1, G..
M101-6 Magnetic Pickup/Speed Sensor
M101-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: standard sensitivity and extra long reach This standard magnetic pickup has ..
M131-6 Magnetic Pickup/Speed Sensor
M131-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: standard sensitivity and extra long reach This standard magnetic pickup has ..
M134-6 Magnetic Pickup/Speed Sensor
M134-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: intrinsically safe, extra long reach This intrinsically-safe, low-output mag..
M155-6 Magnetic Pickup/Speed Sensor
M155-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: turbine flow meter, low drag and extra long reach This special ma..
M183-6 Magnetic Pickup/Speed Sensor
M183-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: high sensitivity, extra long reach This highly sensitive magnetic pickup mak..
M202-6 Magnetic Pickup/Speed Sensor
M202-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: intrinsically safe, extra long reach The low output of this magnetic pickup ..
M203-6 Magnetic Pickup/Speed Sensor
M203-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: intrinsically safe, power zener extra long reach The zener-limited output of..
M204-6 Magnetic Pickup/Speed Sensor
M204-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output o..
M205-6 Magnetic Pickup/Speed Sensor
M205-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output o..
M320 Magnetic Pickup/Speed Sensor
M320 Magnetic Pickup/Speed Sensor
This metric thread magnetic pickup has standard sensitivity which makes it best suited for high s..
M334 Magnetic Pickup/Speed Sensor
M334 Magnetic Pickup/Speed Sensor
This miniature magnetic pickup is highly sensitive which makes it appropriate for lower speed (300 t..
M928-24 Magnetic Pickup/Speed Sensor
M928-24 Magnetic Pickup/Speed Sensor
This active magnetic pickup is a 24 VDC version of the standard model M928, with a digital TTL outpu..
M233-6 Magnetic Pickup/Speed Sensor
M233-6 Magnetic Pickup/Speed Sensor
Magnetic Pickup: high sensitivity, intrinsically safe, extra long reach The low output ..
M207 Magnetic Pickup/Speed Sensor
This magnetic pickup can power other instruments. It produces output even at low speed (300 to 50..
M208 Magnetic Pickup/Speed Sensor
M208 Magnetic Pickup/Speed Sensor
This magnetic pickup can power other instruments. It has high sensitivity which produces output e..
M219 Magnetic Pickup/Speed Sensor
M219 Magnetic Pickup/Speed Sensor
The explosion-proof housing on this magnetic pickup makes it intrinsically safe and CSA approved ..
M231 Magnetic Pickup/Speed Sensor
M231 Magnetic Pickup/Speed Sensor
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a lon..
M233 Magnetic Pickup/Speed Sensor
M233 Magnetic Pickup/Speed Sensor
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a lon..
M304 Magnetic Pickup/Speed Sensor
M304 Magnetic Pickup/Speed Sensor
This standard magnetic pickup has a standard sensitivity which makes it suitable for high speed (..
M318 Magnetic Pickup/Speed Sensor
M318 Magnetic Pickup/Speed Sensor
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environmen..
M319 Magnetic Pickup/Speed Sensor
M319 Magnetic Pickup/Speed Sensor
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environmen..
M343 Bi-Directional Magnetic Pickup
M343 Bi-Directional Magnetic Pickup
This special magnetic pickup is for exclusive use with DST-2000C, a direction-sensing tachometer. Th..
M928 Magnetic Pickup/Speed Sensor
M928 Magnetic Pickup/Speed Sensor
This active magnetic pickup has digital TTL output suitable for zero velocity applications.
Product Name
M155-6 Magnetic Pickup/Speed Sensor -- M155-6 Magnetic Pickup: turbine flow meter, low drag and extra long reach This special magnetic pickup is a low drag flow meter sensor with extra-long 6 inch threaded housing
M233-6 Magnetic Pickup/Speed Sensor -- M233-6 Magnetic Pickup: high sensitivity, intrinsically safe, extra long reach The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has an extra-long 6 inch threaded...
M134-6 Magnetic Pickup/Speed Sensor -- M134-6 Magnetic Pickup: intrinsically safe, extra long reach This intrinsically-safe, low-output magnetic pickup has an extra-long 6 inch threaded housing and is CSA approved. Most CSA-certified pickups retain that approval only...
M101-6 Magnetic Pickup/Speed Sensor -- M101-6 Magnetic Pickup: standard sensitivity and extra long reach This standard magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.)...
M183-6 Magnetic Pickup/Speed Sensor -- M183-6 Magnetic Pickup: high sensitivity, extra long reach This highly sensitive magnetic pickup makes it good for mid-speed (300 to 500 rpm), larger gear (>2 inch diam.) applications. It has...
M202-6 Magnetic Pickup/Speed Sensor -- M202-6 Magnetic Pickup: intrinsically safe, extra long reach The low output of this magnetic pickup makes it intrinsically safe and CSA approved for use in hazardous areas. It has an...
M203-6 Magnetic Pickup/Speed Sensor -- M203-6 Magnetic Pickup: intrinsically safe, power zener extra long reach The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low...
M204-6 Magnetic Pickup/Speed Sensor -- M204-6 Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low...
M131-6 Magnetic Pickup/Speed Sensor -- M131-6 Magnetic Pickup: standard sensitivity and extra long reach This standard magnetic pickup has standard sensitivity with extra-long 6 inch threaded housing.
ISB-101 Magnetic Pickup/Speed Sensor -- ISB-101 INTRINSIC SAFETY BARRIER: Energy limiting device for magnetic pickups, CSA Class I, Division 1, Groups C & D. The ISB-101 is designed to be used in a safe area to...
M205-6 Magnetic Pickup/Speed Sensor -- M205-6 Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed...
M219 Magnetic Pickup/Speed Sensor -- M219 The explosion-proof housing on this magnetic pickup makes it intrinsically safe and CSA approved to operate in high temperature environments. It has a long reach (3.50 inches) and 5/8-18 thread.
M202 Magnetic Pickup/Speed Sensor -- M202 The low output of this magnetic pickup makes it intrinsically safe and CSA approved for use in hazardous areas. It has a standard reach (1.125 inches) and a 5/8-18 thread.
M231 Magnetic Pickup/Speed Sensor -- M231
M233 Magnetic Pickup/Speed Sensor -- M233 The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread. Most CSA-certified pickups retain that...
M139 Magnetic Pickup/Speed Sensor -- M139 The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a medium reach (2.000 inches) and a 3/4-20 thread. Most CSA-certified pickups retain that...
M201 Magnetic Pickup/Speed Sensor -- M201 The low output of this standard magnetic pickup makes it intrinsically safe and CSA approved for use in hazardous areas. It has a standard reach (1.125 inches) and 5/8-18 thread.
M203 Magnetic Pickup/Speed Sensor -- M203 The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 RPM), has a long reach 4.000 inches) and...
M205 Magnetic Pickup/Speed Sensor -- M205 The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam. applications. It...
M204 Magnetic Pickup/Speed Sensor -- M204 The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It...
M928 Magnetic Pickup/Speed Sensor -- M928 This active magnetic pickup has digital TTL output suitable for zero velocity applications. It has a medium reach (2.500 inches) and a 5/8-18 thread. For complete details call a customer...
M928-24 Magnetic Pickup/Speed Sensor -- M928-24 This active magnetic pickup is a 24 VDC version of the standard model M928, with a digital TTL output suitable for zero velocity applications. It has a medium reach (2.500...
M951 Hall Effect Magnetic Pickup/Speed Sensor -- M951 This hall effect sensor is designed to sense ferrous material (gear teeth, hole or pin) for speed measurement down to zero-speed. The digital output is compatible with most PLC input...
M806 Hall Effect Magnetic Pickup/Speed Sensor -- M806 This hall effect sensor is designed to sense the presence of either the north or south pole of a target magnet. Applications are typically cam reference signal for industrial ignition...
M168 Magnetic Pickup/Speed Sensor -- M168 This highly sensitive magnetic pickup is perfect for lower speed (300 to 500 rpm), larger gear (>2 inch diam.) applications. It has a 1.75" housing length, 5/8-18 thread and includes...
M183 Magnetic Pickup/Speed Sensor -- M183 This highly sensitive magnetic pickup makes it good for mid-speed (300 to 500 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and a 5/8-18...
M133 Magnetic Pickup/Speed Sensor -- M133 This highly sensitivity magnetic pickup is well suited for lower speed (300 to 500 rpm) applications. It has long reach(4.000inches) and 5/8-18 thread.
M135 Magnetic Pickup/Speed Sensor -- M135 This intrinsically safe magnetic pickup has a long reach(4.000 inches), 5/8-18 thread, and is CSA approved. Most CSA-certified pickups retain that approval only when used as part of a specific...
M134 Magnetic Pickup/Speed Sensor -- M134 This intrinsically-safe, low-output magnetic pickup has a standard reach (1.125 inches), 5/8-18 thread and is CSA approved. Most CSA-certified pickups retain that approval only when used as part of a...
M208 Magnetic Pickup/Speed Sensor -- M208 This magnetic pickup can power other instruments. It has high sensitivity which produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long...
M207 Magnetic Pickup/Speed Sensor -- M207 This magnetic pickup can power other instruments. It produces output even at low speed (300 to 500 rpm) applications. It also has a long reach (4.000 inches), a 3/4-16 thread...
M143 Magnetic Pickup/Speed Sensor -- M143 This magnetic pickup has a micro-miniature housing and 14 inch leads. Its housing length is a short 0.875 inches and has a 10-32 thread. It is appropriate for small gear...
M104 Magnetic Pickup/Speed Sensor -- M104 This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It has a medium reach (1.875 inches) and 3/4-20 thread. It is UL/CSA approved for...
M319 Magnetic Pickup/Speed Sensor -- M319 This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has...
M318 Magnetic Pickup/Speed Sensor -- M318 This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup which makes it suitable for mid-speed (300 to 500 rpm)...
M140 Magnetic Pickup/Speed Sensor -- M140 This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is intended for standard temperature, lower speed (300 to 500 rpm) applications. It has...
M180 Magnetic Pickup/Speed Sensor -- M180 This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is suited for use in standard temperature, mid speed (300 to 500 rpm), larger...
M320 Magnetic Pickup/Speed Sensor -- M320 This metric thread magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.) applications. It has a 51 mm reach...
M137 Magnetic Pickup/Speed Sensor -- M137 This miniature magnetic pickup has standard sensitivity which is appropriate for higher speed (>500 rpm), small gear(less than 2 inch diameter) applications. It has a housing length of 1.250 inches...
M138 Magnetic Pickup/Speed Sensor -- M138
M334 Magnetic Pickup/Speed Sensor -- M334 This miniature magnetic pickup is highly sensitive which makes it appropriate for lower speed (300 to 500 rpm), small gear (less than 2 inch diam.) applications. Its housing is 1.25...
M155 Magnetic Pickup/Speed Sensor -- M155 This special magnetic pickup is a low drag, flow meter sensor with thread x thread length x housing length = 5/8-18x1.125T x 2.250L.
M107 Magnetic Pickup/Speed Sensor -- M107 This standard magnetic pickup can power other instruments. It has standard sensitivity, standard reach (1.125 inches), and a 5/8-18 inch thread.
M304 Magnetic Pickup/Speed Sensor -- M304 This standard magnetic pickup has a standard sensitivity which makes it suitable for high speed (>500 rpm) applications. It has a long reach (5.125 inches) and a 3/4-16 thread.
M102 Magnetic Pickup/Speed Sensor -- M102 This standard magnetic pickup has high sensitivity which makes it good for mid-speed (300 to 500 rpm), large gear (>12 inch diam.) applications. It has a standard reach (1.125inches) and...
M131 Magnetic Pickup/Speed Sensor -- M131 This standard magnetic pickup has standard sensitivity long reach (4.000inches) and a 5/8-18 thread.
M189 Magnetic Pickup/Speed Sensor -- M189 This standard magnetic pickup has standard sensitivity which makes it appropriate for high speed (>500 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and...
M151 Magnetic Pickup/Speed Sensor -- M151 This standard magnetic pickup has standard sensitivity which makes it appropriate for higher speed (>500 rpm), larger gear(greater than 2 inch diam.)applications. This pickup has a medium reach (2.500 inches)and...
M101 Magnetic Pickup/Speed Sensor -- M101 This standard magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.) applications. It has a standard reach (1.125inches) and...
M142 Magnetic Pickup/Speed Sensor -- M142 This standard magnetic pickup is ultra-sensitive making it appropriate for low speed (less than 300 rpm), larger gear(greater than 2 inch diam.)applications. It has a standard reach (1.125inches) and 5/8-18...
M185 Magnetic Pickup/Speed Sensor -- M185 This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
M184 Magnetic Pickup/Speed Sensor -- M184 This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
如果需要技術咨詢、產品詢價、下單和索要產品技術資料，請與我們聯絡010-84282935。
|
