|
|
|
|
Dynalco SST-2400H Speed Switch / Transmitter
Dynalco SST-2400H 速度傳感器
速度傳感器CSA 1級，2類，C、D組。批準：CSA和CE批準。SST-2000A/H系列是一種高度可配置的產品。SPEED TRANSMITTER CSA Class 1, Division 2, Groups C, D。Approvals: CSA and CE approved. SST-2000A/H series is a highly configurable product.
Dynalco SST-2400H Speed Switch / Transmitter速度傳感器
Dynalco SST-2400H Speed Switch/Transmitter
資料下載:
SST-2400H Data Sheet
SST-2000 Manual
SST-2400H Agency Approval (CSA)
SST-2400H Agency Approval (ABS)
Product Code: SST-2400H
SST-2400H Speed Transmitter
SST-2400H速度變送器
SPEED TRANSMITTER CSA Class 1, Division 2, Groups C, D
Approvals: CSA and CE approved.
The SST-2000A/H series is a highly configurable product.
速度變送器 CSA 1類，2類，C，D組
認證：CSA和CE認證。
SST-2000A / H系列是高度可配置的產品。
特征Features
-現場可選擇4-20 mA（標準），0-5 Vdc或0-10 Vdc的比例輸出。包括標準的0-1 mAdc儀表輸出。
Proportional outputs of either 4–20 mA (standard), 0–5 Vdc, or 0–10 Vdc are fieldselectable. Standard 0-1 mAdc meter output included.
-帶有多達四個警報設定點的型號。
Models available with up to four alarm setpoints.
-現場可選的頻率范圍。
Field-selectable frequency range.
-現場可調靈敏度控制。
Field-adjustable sensitivity control.
-可對多種類型的傳感器進行現場編程，包括觸點閉合輸入。
Field-programmable for many types of sensors, including contact closure input.
-中繼器輸出驅動計數器和自供電數字轉速表，例如Dynalco的SPD-100和SPD-700。
Repeater output drives counters and self-powered digital tachometers such as Dynalco's SPD-100 and SPD-700.
-有源傳感器（例如M910），附件和數字儀表（例如DPM-105或MTH-103D）以及內部照明的SPD-100L和LST-100L的12 Vdc版本的穩壓14 Vdc輸出功率。
Regulated 14 Vdc output powers active pickups (e.g. M910), accessories, and digital meters such as DPM-105 or MTH-103D, and the 12 Vdc versions of the internally lighted SPD-100L and LST-100L.
-警報可針對DPDT（僅限SST-2400 A或-H），超速，欠速，通電，斷電，閂鎖，自動重置進行現場配置。
Alarms are field-configurable for DPDT (SST-2400 A or -H only), overspeed,underspeed, energize, de-energize, latch, auto-reset.
-集成驗證，需要外部儀表。允許查看和設置設定值，而無需操作繼電器。
Integral VERIFY, requires external meter. Permits viewing and setting of setpoint value without actuating the relays.
-輸入頻率：滿量程值，范圍為0–0.1Hz（每分鐘6個脈沖）至0–50,000 Hz。
Input Frequency: Full-scale values from 0–0.1Hz (6 pulses per minute) to 0–50,000 Hz.
-功能：將頻率輸入（速度，速率）轉換為線性比例直流輸出。提供超速和欠速控制以及順序，啟動和關閉切換的警報設置點。
Function: Converts frequency input (speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.
-應用范圍：包括引擎，機器，I / P驅動程序，儀器，過程控制，記錄，測量。
Applications: Includes engines, machines, I/P drivers, instrumentation, process control, recording, measurement.
-信號源：包括電磁傳感器，交流發電機，觸點閉合，光電管。
Signal Sources: Includes magnetic pickups, ac generators, contact closures, photocells.
-輸出范圍功能：始終包括高達50 mAdc輸出的電流源。
Output Range Capability: Current source up to 50 mAdc output always included.
-警報設定點：可用于兩個或四個繼電器。也可不帶繼電器
Alarm Setpoints: Available with two or four relays. Also available with no relays
|
