|
|
|
|
Dynalco SST-2200A Speed Switch/Transmitter
Dynalco SST-2200A 速度開關
速度開關：超速/低速保護，帶2個標準繼電器設定值的變送器，CSA一般分類SPEED SWITCH: over/under speed protection, transmitter with 2 standard relay setpoints, CSA General Classification
Dynalco SST-2200A有2個繼電器設定點，接收來自無源或有源磁性傳感器、軸編碼器、觸點閉合、流量計等的信號輸入，以提供比例模擬輸出。批準：CSA，CE批準。SST-2200A has 2 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA, CE approved.
Dynalco SST-2000A/H系列是一款高度可配置的產品。SST- 2000A/H series is a highly configurable product.
Dynalco SST-2200A Speed Switch/Transmitter速度開關
Dynalco SST-2200A Speed Switch/Transmitter
資料下載:
SST-2200A Data Sheet
SST-2000 Manual
SST-2200A Agency Approval (CSA)
SST-2200A Agency Approval (ABS)
Product Code: SST-2200A
SST-2200A Speed Transmitter
SST-2200A速度變送器
SPEED SWITCH: over/under speed protection, transmitter with 2 standard relay setpoints, CSA General Classification
The SST-2200A has 2 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA, CE approved.
The SST- 2000A/H series is a highly configurable product.
速度開關：過速/欠速保護，帶有2個標準繼電器設定值的變送器，CSA通用分類
SST-2200A具有2個繼電器設定值，并接收來自無源或有源電磁傳感器，軸編碼器，觸點閉合，流量計等的信號輸入，以提供比例模擬輸出。批準：CSA，CE批準。
SST-2000A / H系列是高度可配置的產品。
特征Features
-現場可選擇4-20 mA（標準），0-5 Vdc或0-10 Vdc的比例輸出。包括標準的0-1 mAdc儀表輸出。
Proportional outputs of either 4–20 mA (standard), 0–5 Vdc, or 0–10 Vdc are fieldselectable. Standard 0-1 mAdc meter output included.
-帶有多達四個警報設定點的型號。
Models available with up to four alarm setpoints.
-現場可選的頻率范圍。
Field-selectable frequency range.
-現場可調靈敏度控制。
Field-adjustable sensitivity control.
-可對多種類型的傳感器進行現場編程，包括觸點閉合輸入。
Field-programmable for many types of sensors, including contact closure input.
-中繼器輸出驅動計數器和自供電數字轉速表，例如Dynalco的SPD-100和SPD-700。
Repeater output drives counters and self-powered digital tachometers such as Dynalco's SPD-100 and SPD-700.
-有源傳感器（例如M910），附件和數字儀表（例如DPM-105或MTH-103D）以及內部照明的SPD-100L和LST-100L的12 Vdc版本的穩壓14 Vdc輸出功率。
Regulated 14 Vdc output powers active pickups (e.g. M910), accessories, and digital meters such as DPM-105 or MTH-103D, and the 12 Vdc versions of the internally lighted SPD-100L and LST-100L.
-警報可針對DPDT（僅限SST-2400 A或-H），超速，欠速，通電，斷電，閂鎖，自動重置進行現場配置。
Alarms are field-configurable for DPDT (SST-2400 A or -H only), overspeed,underspeed, energize, de-energize, latch, auto-reset.
-集成驗證，需要外部儀表。允許查看和設置設定值，而無需操作繼電器。
Integral VERIFY, requires external meter. Permits viewing and setting of setpoint value without actuating the relays.
-輸入頻率：滿量程值，范圍為0–0.1Hz（每分鐘6個脈沖）至0–50,000 Hz。
Input Frequency: Full-scale values from 0–0.1Hz (6 pulses per minute) to 0–50,000 Hz.
-功能：將頻率輸入（速度，速率）轉換為線性比例直流輸出。提供超速和欠速控制以及順序，啟動和關閉切換的警報設置點。
Function: Converts frequency input (speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.
-應用范圍：包括引擎，機器，I / P驅動程序，儀器，過程控制，記錄，測量。
Applications: Includes engines, machines, I/P drivers, instrumentation, process control, recording, measurement.
-信號源：包括電磁傳感器，交流發電機，觸點閉合，光電管。
Signal Sources: Includes magnetic pickups, ac generators, contact closures, photocells.
-輸出范圍功能：始終包括高達50 mAdc輸出的電流源。
Output Range Capability: Current source up to 50 mAdc output always included.
-警報設定點：可用于兩個或四個繼電器。也可不帶繼電器
Alarm Setpoints: Available with two or four relays. Also available with no relays
|
