|
Dynalco SW-200B Speed Switch發動機超速保護開關
engine overspeed protection Switch
Dynalco SW-200B提供可靠的發動機超速保護。它有三個可調繼電器設定值：第一個是超速。兩個輔助設備的用途包括曲柄斷開、發電機磁場閃爍和速度監測。設定值是現場可編程的，可以在不超速的情況下進行測試。外殼是密封的。SW-200B速度開關提供三個可調繼電器設定點，用于發動機超速保護、曲柄斷開、發電機磁場閃爍和速度監測，并具有完全的現場編程能力。
Dynalco SW-200B provides reliable engine overspeed protection. It has three adjustable relay setpoints: number one is overspeed. Uses for the two auxiliaries include crank disconnect, generator field-flashing, and speed monitoring. Setpoints are field-programmable and can be tested without overspeeding. Housing is gasketed and sealed.SW-200B Speed Switch provides three adjustable relay set points for engine overspeed protection, crank disconnect, generator field flashing, and speed monitoring with full field-programming capability.
Dynalco SW-200B Speed Switch 
Dynalco SW-200B Speed Switch
Inputs: Senses signal frequency from magnetic pickup or AC signal generator.
Outputs: Three relays (speed setpoints) and one 0-1 mA proportional DC output.
Field-programmable: Four DIP switches provide a variety of frequency input and overspeed relay logic configurations. Also three trim potentiometers to adjust setpoint range, and one potentiometer to adjust the proportional output.
Circuit: High-reliability. Virtually immune to electrical and RFI noise.
Test/Verify: Permits testing without overspeeding.
Case: Sealed and gasketed.
資料下載:
SW-200B Data Sheet
SW-200B Manual
Product Code: SW-200B
SW-200B
SW-200B Speed Switch
SW-200B Speed Switch發動機超速保護開關
Miscellaneous
Dynalco Rep Locator
Datasheets
Dynalco SW-200B Speed Switch Datasheet
Operating Manuals
Dynalco SW-200B Speed Switch Manual
Details
SW-200B
SW-200B 速度開關
Dynalco Rep定位器
數據表
Dynalco SW-200B速度開關數據表
操作手冊
Dynalco SW-200B速度開關手冊
細節
SW-200B提供可靠的發動機超速保護。它具有三個可調節的繼電器設定值：一是超速。這兩個輔助設備的用途包括曲軸斷開，發電機現場閃爍和速度監控。設定值是現場可編程的，可以進行測試而不會超速。外殼已密封并密封。
The SW-200B provides reliable engine overspeed protection. It has three adjustable relay setpoints: number one is overspeed. Uses for the two auxiliaries include crank disconnect, generator field-flashing, and speed monitoring. Setpoints are field-programmable and can be tested without overspeeding. Housing is gasketed and sealed.
特征Features
輸入：感應來自電磁傳感器或交流信號發生器的信號頻率。
Inputs: Senses signal frequency from magnetic pickup or AC signal generator.
輸出：三個繼電器（速度設定值）和一個0-1 mA比例直流輸出。
Outputs: Three relays (speed setpoints) and one 0-1 mA proportional DC output.
現場可編程：四個DIP開關提供各種頻率輸入和超速繼電器邏輯配置。還有三個調整電位器來調節設定點范圍，一個電位器來調整比例輸出。
Field-programmable: Four DIP switches provide a variety of frequency input and overspeed relay logic configurations. Also three trim potentiometers to adjust setpoint range, and one potentiometer to adjust the proportional output.
電路：高可靠性。幾乎不受電氣和RFI噪聲的影響。
Circuit: High-reliability. Virtually immune to electrical and RFI noise.
測試/驗證：允許進行測試而不會超速。
Test/Verify: Permits testing without overspeeding.
外殼：密封和襯墊。
Case: Sealed and gasketed.
|
