|
Dynalco PG-100 Pulser
Dynalco PG-100 Pulser脈沖發生器
PG-100每秒鐘從集成的磁傳感器（不包括）中產生60個脈沖。它使用可拆卸的錐形鎖緊襯套直接安裝在直徑0.50至1.25英寸（1.27至3.18厘米）的軸上。信號直接饋入儀表，速度開關等。不需要外部電源。當沒有外部裝備時很有用。
The PG-100 generates 60 pulses per revolution from an integral magnetic pickup (not included). It mounts directly on 0.50 to 1.25 inch (1.27 to 3.18 cm) diameter shafts using a removable taper lock bushing. The signal feeds directly into meters, speed switches, etc. No external power is required. Useful when an external gear is not available.
PG-100 脈沖發生器 
PG-100
PG-100 Pulser
Datasheets
Dynalco PG-100 Pulser Datasheet and Manual
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details
PG-100
PG-100 脈沖發生器
數據表
Dynalco PG-100 Pulser數據表和手冊
Dynalco Rep定位器
磁性傳感器
細節
Description
TACHOMETER: RPM pulser
"-1" tapped for 5/8x18 thread
"-2" tapped for 3/4x20 thread
描述
TACHOMETER：RPM脈沖
“-1”螺紋為5/8x18螺紋
“-2”螺紋為3/4x20螺紋
PG-100每秒鐘從集成的磁傳感器（不包括）中產生60個脈沖。它使用可拆卸的錐形鎖緊襯套直接安裝在直徑0.50至1.25英寸（1.27至3.18厘米）的軸上。信號直接饋入儀表，速度開關等。不需要外部電源。當沒有外部裝備時很有用。
The PG-100 generates 60 pulses per revolution from an integral magnetic pickup (not included). It mounts directly on 0.50 to 1.25 inch (1.27 to 3.18 cm) diameter shafts using a removable taper lock bushing. The signal feeds directly into meters, speed switches, etc. No external power is required. Useful when an external gear is not available.
特征Features
當軸上沒有可用齒輪從電磁傳感器產生信號頻率時，或者與安裝帶相關支架的齒輪或鏈輪相比，更方便地在傳感器上滑動時，可以使用PG-100。具有適當間距的磁性傳感器
The PG-100 can be used when a gear is not available on the shaft to generate a signal frequency from a magnetic pickup, or when it is more convenient to slip on theis transducer than to mount a gear or sprocket with associated bracket to hold the magnetic pickup with appropriate spacing.
|
