|
Dynalco M321 ATEX和IECEx認證高靈敏度傳感器
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性傳感器/速度傳感器
Dynalc Passive Variable Reluctance -Ordinary Area
無源可變磁阻傳感器-危險區域應用 Dynalco M321 High Sensitivity Sensors
DYNALCO M321 電磁傳感器已通過ATEX和IECEx認證，可用于危險區域：Ex mb（1、2區）和Ex ia（0、1、2區）。它是一款靈敏的傳感器，適用于中速應用（最小RPM為300至500），較大齒輪（直徑大于2英寸）的應用。M321具有UNF2A和M（公制）類型的多種螺紋尺寸，螺紋長度為1.875英寸至6英寸。
This magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum rpm), larger gear (>2 inch diam) applications. M321 has multiple thread sizes of UNF2A and M (metric) type, and thread lengths from 1.875” to 6”.
300系列不銹鋼外殼完全采用危險區域等級的環氧樹脂灌封，內部沒有空氣間隙，這使其在危險區域使用時可靠，堅固且安全。
The 300 series Stainless Steel housing is fully potted with hazardous area rated epoxy resin with no air gap inside, which makes it a reliable, robust and absolutely safe for use in Hazardous areas.
DYNALCO M321 Series Magnetic Pickup/Speed Sensor
M321電磁傳感器已通過ATEX和IECEx認證
M321 Series
M321 Series Magnetic Pickup/Speed Sensor
M321 High Sensitivity Sensors
Multiple Thread Sizes and Lengths
Passive (Variable Reluctance) - Hazardous Area
High Sensitivity (min. Speed > 300 RPM)
Datasheets
Dynalco M321 Datasheet
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Approvals認證
M321 ATEX Certificate
M321 IECEx Certificate
Installation Manuals
M321 Installation Instructions
M321系列
M321高靈敏度傳感器
多種螺紋尺寸和長度
被動（可變磁阻）-危險區域
高靈敏度（速度> 300 RPM）
數據表
Dynalco M321資料表
雜
Dynalco Rep定位器
磁性傳感器
批準書
M321 ATEX證書
M321 IECEx證書
安裝手冊
M321安裝說明
Multiple Thread Sizes and Lengths 多種螺紋尺寸和長度
Passive (Variable Reluctance) - Hazardous Area 被動（可變磁阻）-危險區域
High Sensitivity (min. Speed > 300 RPM) 高靈敏度（速度> 300 RPM）
M321電磁傳感器已通過ATEX和IECEx認證，可用于危險區域：Ex mb（1、2區）和Ex ia（0、1、2區）。它是一款靈敏的傳感器，適用于中速應用（最小rpm為300至500），較大齒輪（直徑大于2英寸）的應用。M321具有UNF2A和M（公制）類型的多種螺紋尺寸，螺紋長度為1.875英寸至6英寸。
M321magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum rpm), larger gear (>2 inch diam) applications. M321 has multiple thread sizes of UNF2A and M (metric) type, and thread lengths from 1.875” to 6”.
300系列不銹鋼外殼完全采用危險區域等級的環氧樹脂灌封，內部沒有空氣間隙，這使其在危險區域使用時可靠，堅固且安全。
The 300 series Stainless Steel housing is fully potted with hazardous area rated epoxy resin with no air gap inside, which makes it a reliable, robust and absolutely safe for use in Hazardous areas.
|
