|
Dynalco M205 Magnetic Pickup/Speed Sensor
Dynalco M205 電磁傳感器/速度傳感器
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性傳感器/速度傳感器
Dynalc Passive Variable Reluctance -Ordinary Area
無源可變磁阻傳感器-危險區域應用
該電磁傳感器的zener-limited輸出使其本質安全并獲得CSA認證。即使在低速（<300 rpm），較大齒輪（直徑大于2英寸的應用場合）下也能產生輸出。它的作用范圍很廣（4.000英寸），螺紋為5 / 8-18。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam. applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
大多數經過CSA認證的皮卡僅在作為特定認證系統或組件的一部分使用時才保留該批準。UL，CENELEC和某些CSA認可的傳感器可與任何儀器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
M205 Magnetic Pickup/Speed Sensor 
M205
M205 Magnetic Pickup/Speed Sensor
M205
M205 Magnetic Pickup/Speed Sensor
5/8-18 x 4" - 2 Pin - Zener-Limited
Passive (Variable Reluctance) - Hazardous Area
Ultra-High Sensitivity (min. Speed < 300 RPM)
Approvals
Dynalco CSA Approval for Intrinsically Safe and Non-Incendive Systems for Hazardous Locations
Datasheets
Dynalco M205 - 5/8-18 x 4" - 2 Pin - Zener-Limited Datasheet
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details
M205
M205電磁傳感器/速度傳感器
5 / 8-18 x 4“-2針-齊納限制
被動（可變磁阻）-危險區域
超高靈敏度（速度<300 RPM）
批準書
Dynalco CSA批準用于危險場所的本安和非易燃系統
數據表
Dynalco M205-5 / 8-18 x 4“-2針-穩壓管有限數據表
Dynalco Rep定位器
磁性傳感器
細節
5/8-18 x 4" - 2 Pin - Zener-Limited 5 / 8-18 x 4“-2針-Zener-Limited
Passive (Variable Reluctance) - Hazardous Area 無源（可變磁阻）-危險區域
Ultra-High Sensitivity (min. Speed < 300 RPM) 超高靈敏度（速度<300 RPM）
該電磁傳感器的zener-limited輸出使其本質安全并獲得CSA認證。即使在低速（<300 rpm），較大齒輪（直徑大于2英寸的應用場合）下也能產生輸出。它的作用范圍很廣（4.000英寸），螺紋為5 / 8-18。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam. applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
大多數經過CSA認證的皮卡僅在作為特定認證系統或組件的一部分使用時才保留該批準。UL，CENELEC和某些CSA認可的傳感器可與任何儀器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
|
