|
Dynalco M204 Magnetic Pickup/Speed Sensor
Dynalco M204 電磁傳感器/速度傳感器
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性傳感器/速度傳感器
Dynalc Passive Variable Reluctance -Ordinary Area
無源可變磁阻傳感器-危險區域應用
Download Info:
Dynalco M204 Data Sheet
Dynalco M204 Agency Approval
Dynalco M204 Magnetic Pickup/Speed Sensor電磁感應速度傳感器
Product Code: M204
M204
M204 Magnetic Pickup/Speed Sensor
M204
M204 Magnetic Pickup/Speed Sensor
5/8-18 x 2.5" - 2 Pin - Zener-Limited
Passive (Variable Reluctance) - Hazardous Area
Ultra-High Sensitivity (min. Speed < 300 RPM)
Approvals
Dynalco CSA Approval for Intrinsically Safe and Non-Incendive Systems for Hazardous Locations
Datasheets
Dynalco M204 - 5/8-18 x 2.5" - 2 Pin - Zener-Limited Datasheet
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details
M204
M204電磁傳感器/速度傳感器
5 / 8-18 x 2.5“-2針-齊納限制
被動（可變磁阻）-危險區域
超高靈敏度（速度<300 RPM）
批準書
Dynalco CSA批準用于危險場所的本安和非易燃系統
數據表
Dynalco M204-5 / 8-18 x 2.5“-2針-穩壓管有限數據表
Dynalco Rep定位器
磁性傳感器
細節
5/8-18 x 2.5" - 2 Pin - Zener-Limited 5 / 8-18 x 2.5“-2針-Zener-Limited
Passive (Variable Reluctance) - Hazardous Area 被動（可變磁阻）-危險區域
Ultra-High Sensitivity (min. Speed < 300 RPM) 超高靈敏度（速度<300 RPM）
該電磁傳感器的齊納限制輸出使其本質安全并獲得CSA認證。即使在低速（<300 rpm），大齒輪（> 2英寸直徑）應用中，它也能產生輸出。它具有中等范圍（2.5英寸）和5 / 8-18螺紋。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.5 inches) and a 5/8-18 thread.
大多數經過CSA認證的皮卡僅在作為特定認證系統或組件的一部分使用時才保留該批準。UL，CENELEC和某些CSA認可的傳感器可與儀器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
這種電磁感應速度傳感器的齊納有限輸出使其本質安全，并通過了CSA認證。它甚至在低速（<300轉/分）、大齒輪（>2英寸直徑）應用中也能產生輸出。它有中等長度（2.5英寸）和5/8-18螺紋。The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.5 inches) and a 5/8-18 thread.
大多數經CSA認證的皮卡僅在用作特定認證系統或組件的一部分時保留該認證。UL、CENELEC和一些經CSA批準的拾音器可用于任何儀器。Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
|
