|
Dynalco M203-6 電磁傳感器/速度傳感器
Dynalco M203-6 Magnetic Pickup/Speed Sensor
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性傳感器/速度傳感器
Dynalco Passive (Variable Reluctance)-Ordinary Area
無源可變磁阻傳感器-普通區域應用
Magnetic Pickup: intrinsically safe, power zener extra long reach 電磁傳感器：本質安全，功率齊納二極管超長距離
該電磁傳感器的zener-limited輸出使其本質安全并獲得CSA認證。即使在低速（<300 RPM）時，它也可以產生輸出，其超長距離可達6英寸）和5 / 8-18螺紋。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 RPM), has an extra long reach 6 inches) and 5/8-18 thread.
大多數經過CSA認證的皮卡僅在作為特定認證系統或組件的一部分使用時才保留該批準。UL，CENELEC和某些CSA認可的傳感器可與任何儀器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
M203-6 Magnetic Pickup/Speed Sensor 
M203-6
M203-6 Magnetic Pickup/Speed Sensor
M203-6
M202-6 Magnetic Pickup/Speed Sensor
5/8-18 x 6" - 2 Pin - Zener-Limited
Passive (Variable Reluctance) - Ordinary Area
Ultra-High Sensitivity (min. Speed < 300 RPM)
Datasheets
Dynalco M203-6 - 5/8-18 x 6" - 2 Pin - Zener-Limited Datasheet
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details
M203-6
M202-6電磁傳感器/速度傳感器
5 / 8-18 x 6“-2針-齊納限制
被動（可變磁阻）-普通區域
超高靈敏度（速度<300 RPM）
數據表
Dynalco M203-6-5 / 8-18 x 6“-2針-穩壓管有限數據表
Dynalco Rep定位器
磁性傳感器
細節
5/8-18 x 6" - 2 Pin - Zener-Limited 5 / 8-18 x 6“-2針-Zener-Limited
Passive (Variable Reluctance) - Ordinary Area 無源（可變磁阻）-普通區域
Ultra-High Sensitivity (min. Speed < 300 RPM) 超高靈敏度（速度<300 RPM）
Magnetic Pickup: intrinsically safe, power zener extra long reach 電磁傳感器：本質安全，功率齊納二極管超長距離
該電磁傳感器的zener-limited輸出使其本質安全并獲得CSA認證。即使在低速（<300 RPM）時，它也可以產生輸出，其超長距離可達6英寸）和5 / 8-18螺紋。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 RPM), has an extra long reach 6 inches) and 5/8-18 thread.
大多數經過CSA認證的皮卡僅在作為特定認證系統或組件的一部分使用時才保留該批準。UL，CENELEC和某些CSA認可的傳感器可與任何儀器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
|
