|
Dynalco DST2000C Direction Sensing Speed Switch/Transmitter
Dynalco DST2000C 方向感應速度開關/變送器
DST-2000C方向感應轉速表可測量和監視旋轉，速度，速率，流量等方向。能夠驅動轉速表和向上/向下計數器以提供速率信息以及總凈流量，長度，距離等。可以驅動并行5個SPD-300（方向感測顯示器）。輸入電源：115 Vac和/或12或24 Vdc。
The DST-2000C direction sensing tachometer measures and monitors direction of rotation, speed, rate, flow, etc. Capable of driving tachometers and up/down counters to provide rate information as well as total net flow, length, distance, etc. Can drive up to 5 SPD-300 (direction sensing displays) in parallel. Input power: 115 Vac and/or 12 or 24 Vdc.
Dynalco DST-2000C 方向感應速度開關/變送器 
DST-2000C
DST2000C-Powered Tachometer
Direction Sensing Speed Switch/Transmitter
Datasheets
Dynalco DST-2000C Powered Tachometer Datasheet
Operating Manuals
Dynalco DST-2000C Powered Tachometer Manual
Miscellaneous
Dynalco Rep Locator
Details
DST-2000C
DST2000C供電的轉速表
方向感應速度開關/變送器
數據表
Dynalco DST-2000C動力轉速表數據表
操作手冊
Dynalco DST-2000C動力轉速表手冊
Dynalco Rep定位器
細節
Description
DST-2000C方向感應轉速表可測量和監視旋轉，速度，速率，流量等方向。能夠驅動轉速表和向上/向下計數器以提供速率信息以及總凈流量，長度，距離等。可以驅動并行5個SPD-300（方向感測顯示器）。輸入電源：115 Vac和/或12或24 Vdc。
The DST-2000C direction sensing tachometer measures and monitors direction of rotation, speed, rate, flow, etc. Capable of driving tachometers and up/down counters to provide rate information as well as total net flow, length, distance, etc. Can drive up to 5 SPD-300 (direction sensing displays) in parallel. Input power: 115 Vac and/or 12 or 24 Vdc.
特征Features
使用來自Dynalco M343雙向拾音器的信號來測量速度和旋轉方向。
Uses the signal from a Dynalco M343 bidirectional pickup to measure speed and direction of rotation.
提供輸出脈沖，用于加/減計數器或僅加計數器。
Provides output pulses for feeding up/down or up-only counters.
驅動Dynalco模擬和數字轉速表，包括SPD-100，SPD-700，DS-800和新的SPD-300方向指示轉速表。（參見下一頁）還驅動速度開關，例如SST-2000A / H和SW-200B。
Drives Dynalco analog and digital tachs including SPD-100, SPD-700, DS-800, and the new SPD-300 Direction Indicating Tach. (See next page) Also drives speed switches such as SST-2000A/H and SW-200B.
根據旋轉方向提供繼電器輸出，即，一個SPDT繼電器用于順時針（CW），一個SPDT繼電器用于逆時針（CCW）。
Provides a relay output according to direction of rotation, i.e. one SPDT relay for clockwise (CW) and one SPDT relay for counterclockwise (CCW).
為兩個遠程（客戶提供）LED提供10 mA驅動電流，以指示CW或CCW方向。
Provides 10 mA drive current for two remote (customer-provided) LEDs to indicate CW or CCW direction.
通過在沒有信號輸入的情況下使有源繼電器在幾秒鐘后自動復位，從而避免出現錯誤指示。
Avoids false indications by having the active relay automatically reset after a few seconds with no signal input.
提供與速度成比例的0–1 mA輸出，以驅動Dynalco Controls模擬儀表（例如G-101）或數字儀表（例如DPM-105）。
為Dynalco DPM-105數字面板儀表提供穩定的8 Vdc（25 mA）輔助電源。
Provides a 0–1 mA output proportional to speed to drive Dynalco Controls analog meters such as the G-101 or digital meters such as the DPM-105.
Provides regulated 8 Vdc (25 mA) auxiliary power to a Dynalco DPM-105 digital panel meter.
|
