DPM-105 Universal Digital Panel Meter數字面板儀表
DPM-105 Panel Meter
DPM-105以相應的工程單位顯示速度、溫度、速率或幾乎任何可變類型。僅0–1 mA輸入,取代模擬面板儀表,以提高精度,可讀性和可靠性。用作Dynalco速度和溫度傳感器的讀數,以及遠程轉速表。The DPM-105 displays speed,temperature, rate, or virtually any variable type, in corresponding engineering units. 0–1 mA input only. Replaces analog panel meters for greater accuracy, readability, and reliability. Use as readout for Dynalco speed and temperature transmitters, and as a remote tachometer.
DPM-105 Universal Digital Panel Meter數字面板儀表
DPM-105 Panel Meter (0-1mA)面板儀表(0-1mA)
Operating Manuals
Dynalco DPM-105 Panel Meter (0-1mA)
Approvals
Dynalco DPM-105 Panel Meter (0-1mA) CSA Approval
Miscellaneous
Dynalco Rep Locator
Details
操作手冊
Dynalco DPM-105面板儀表(0-1mA)
批準書
Dynalco DPM-105面板儀表(0-1mA)CSA認證
雜
Dynalco Rep定位器
細節
描述Description
METER:通用數字面板表,通過ABS和CSA認證
METER: universal digital panel meter, ABS & CSA approval
接受與壓力,溫度或任何其他變量成比例的0-1 mA信號。
Accepts a 0-1 mA signal proportional to pressure, temperature, or any other variable.
直徑3-3 / 8英寸的外殼堅固,密封,防潮,適用于室內和室外應用。
3-3/8 inch diameter housing is rugged, sealed, and spray- proof for indoor and outdoor applications.
現場可調。直流供電(8-40 Vdc)。
Field-adjustable. DC-powered (8-40 Vdc).
對于低溫運行,可另購LCD加熱條。
For low temperature operation, an optional LCD heater strip is available at additional cost.
特征
堅固:無儀表運動;全固態。標準SAE機箱適合帶有3-3 / 8“開口的面板。
密封:耐酸氣和濕氣,以防止模擬儀表運動中的彈簧腐蝕。
大型0.4英寸高位數:液晶顯示器,一位數的分辨率。顯示對比度隨環境光線的增加而增加。非常適合戶外安裝。
通用,現場可調:讀數范圍從零到1999,具有集成的多圈跨度電位計。
第三方認證:(本質安全)CSA: Class I,Division 1,A,B,C和D組,額定8–40 Vdc,10 mA。根據Dynalco圖紙B8008843連接到CSA認證的齊納屏障設備時,符合本質安全標準。ABS:證書編號92-QE-10237-X。
自動歸零:接通電源后,零輸入的讀數為“ 0000”。可以將單位從0校準到1999年以前的任何顯示范圍。儀表僅在信號變負時才顯示負。正負讀數遵循輸入信號的極性。
電源:可以從8到40 Vdc供電。在9 V時僅消耗0.5 mA。
信號:接受接地和不接地的信號源。
Rugged: No meter movement; all solid-state. Standard SAE case fits panels with 3-3/8" openings.
Sealed: Resistant to sour gas and moisture that attack springs in an analog meter movement.
Large 0.4" High Digits: Liquid Crystal Display, 1-digit resolution. Display contrast increases with increasing ambient light. Ideal for outdoor installations.
Universal, Field-Adjustable: Adjustable readout ranges from zero to 1999, with integral multi-turn span potentiometer.
Third Party Approvals: (Intrinsic Safety) CSA: Class I, Division 1, Groups A, B, C, & D, rated 8–40 Vdc, 10 mA maximum. Meets standards for intrinsic safety, when connected to CSA certified Zener barrier devices per Dynalco drawing B8008843. ABS: Certificate No. 92-QE-10237-X.
Auto Zero: Readout is “0000” at zero input with power applied. The unit can be calibrated from 0 to any display range up to 1999. The meter indicates negative only when the signal goes negative. Positive and negative read-outs follow the polarity of the input signal.
Power: Can be powered from 8 to 40 Vdc. Consumes only 0.5 mA at 9 V.
Signal: Accepts grounded and ungrounded signal sources.
技術資料下載:
DPM-105 Data Sheet & Manual
DPM-105 Agency Approval
Product Code: DPM-105
技術資料
DPM-105 Data Sheet & Manual
DPM-105 Agency Approval
Product Code: DPM-105
|